Key Features
- Stabilized 24 V DC output: Controlled, isolated DC voltage with 24 V output and 5 A rated current.
- 120 – 240 V AC/DC input: Wide range input for 1-phase AC or DC supply, with 50/60 Hz operation.
- Diagnostic interface: Unidirectional communication function that can only send data to the higher-level control and analysis system.
- Galvanic isolation and protection: Galvanic isolation between input and output, short-circuit proof output, and IP20 protection class.
- Selection-relevant operating data: 88 % efficiency, 120 W typical supplied active power, and 20 ms mains buffering time.
Applications
- 24 V DC supply for the connected control load: Provides stabilized 24 V DC power at 5 A.
- Diagnostic data transmission to a higher-level system: Sends data to a higher-level control and analysis system through the diagnostic interface.
Technical Summary
| Output voltage | 24 V |
|---|---|
| Output current | 5 A |
| Input voltage, AC | 120 … 240 V |
| Input voltage, DC | 120 … 240 V |
| Type of power supply network | 1-phase AC or DC |
| Line frequency | 50/60 Hz |
| Number of outputs | 1 |
| Efficiency | 88 % |
| Galvanic isolation between input and output | Yes |
| Protection class IP | IP20 |
| Mains buffering time | 20 ms |
| Diagnostic interface | unidirectional, can only send data to the higher-level control and analysis system |
Frequently Asked Questions
What is the Siemens 6EP3333-4SC00-3AX0?
It is a SIMATIC S7-1200 power module PM 1207 EX with a stabilized 24 V DC output.
What input voltage does 6EP3333-4SC00-3AX0 accept?
The input is 120 – 240 V AC/DC.
What output rating does the PM 1207 EX provide?
It provides 24 V DC at 5 A.
Does 6EP3333-4SC00-3AX0 have a diagnostic interface?
Yes. It has a diagnostic interface with unidirectional communication to a higher-level control and analysis system.
What should be checked for selection of this power module?
Check the 120 – 240 V AC/DC input, 24 V DC/5 A output, 1-phase AC or DC network type, and the available diagnostic connection.
