Key Features
- Analog outputs: 8 AO 0/4 – 20 mA HART
- Environmental range: -25…+60 °C
- Protection: Conformal coating
- System context: For ET 200M with IM 153-2
- Functions: Firmware update, HART auxiliary variables, redundancy, local diagnostic buffer with time stamping
- Requirement: PCS 7 V7.0, SP1
Applications
- Analog current output control: Provides 8 analog outputs for 0/4 – 20 mA HART current signals.
- ET 200M integration: Used with ET 200M and IM 153-2.
- HART signal handling: Supports HART auxiliary variables for HART-based output use.
- Diagnostic recording: Uses a local diagnostic buffer with time stamping for recorded diagnostics.
Technical Summary
| Based on | 6ES7332-8TF01-0AB0 |
|---|---|
| Product function | Isochronous mode: No |
| Load voltage L+ | Rated value (DC) 24 V |
| Load voltage L+ reverse polarity protection | Yes |
| Input current from load voltage L+ | 350 mA |
| Input current from backplane bus 5 V DC | 110 mA |
| Power loss, typ. | 6 W |
| Number of analog outputs | 8 |
| Current output, no-load voltage, max. | 24 V |
| Output range 0 to 20 mA | Yes |
| Output range 4 mA to 20 mA | Yes |
| Current output load impedance, max. | 750 Ω |
| Current output inductive load, max. | 10 mH |
| Resolution with overrange (bit including sign), max. | 16 bit |
| Settling time for resistive load | 0.1 ms |
| Settling time for inductive load | 0.5 ms |
| Basic error limit at 25 °C | 0.1 % |
| Operational error limit in overall temperature range | 0.2 %; ±0.4 % @ < 0 °C or > 60 °C |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Diagnostic alarm | Yes |
| Diagnostic information readable | Yes |
| Group error SF (red) | Yes |
| Potential separation analog outputs between the channels | No |
| Potential separation analog outputs between the channels and backplane bus | Yes |
| Potential separation analog outputs Between the channels and load voltage L+ | Yes |
| Potential separation analog outputs between the channels and the power supply of the electronics | Yes |
| Isolation tested with | 500 V DC |
Frequently Asked Questions
What is Siemens 6AG1332-8TF01-2AB0?
It is a SIPLUS S7-300 SM 332 8 AO HART spare part based on 6ES7332-8TF01-0AB0.
How many analog outputs does 6AG1332-8TF01-2AB0 provide?
It provides 8 analog outputs.
Which output signals does the module support?
It supports 0/4 – 20 mA HART current outputs, with 0 to 20 mA and 4 mA to 20 mA available.
What supply and installation details are important for selection?
The module uses 24 V DC load voltage, has reverse polarity protection, and is specified for ET 200M with IM 153-2.
What software requirement is listed for this module?
PCS 7 V7.0, SP1 is required.
