Key Features
- PROFIBUS DP communication module: Communications module for connection of S7-1500 to PROFIBUS DP as DP master and DP Device.
- Diagnostics and synchronization: Supports diagnostics, S7 and PG/OP communication, and time-of-day synchronization.
- Conformal coating for extreme conditions: SIPLUS version with conformal coating and -40…+70 °C temperature range, with start up -25 °C.
- Step 7 configuration: Required configuration software: STEP 7 Professional V18 (TIA Portal) or higher.
- Rail-mounted compact module: Compact module S7-1500 single width with S7-1500 rail mounting and IP20 protection class.
Applications
- PROFIBUS DP network integration: Connection of an S7-1500 system to PROFIBUS DP as DP master or DP Device.
- S7 communication: S7 communication with other connected systems through the module.
- PG/OP communication: PG/OP communication for engineering and operator access.
- Time synchronization distribution: Pass on time synchronization to connected systems.
Technical Summary
| Product type designation | CM 1542-5 |
|---|---|
| Brand name | SIPLUS |
| PROFIBUS transfer rate | 9.6 kbit/s … 12 Mbit/s |
| PROFIBUS electrical connection | 9-pin Sub-D socket (RS485) |
| Supply voltage | DC |
| Supply voltage from backplane bus | 15 V |
| Power loss | 3 W |
| Number of interfaces according to Industrial Ethernet | 0 |
| Number of possible connections for open communication by means of SEND/RECEIVE blocks | 30 |
| User data per connection for open communication by means of SEND/RECEIVE blocks | 240 byte |
| Number of possible connections for S7 communication | 48; depending on the system upper limit |
| Number of DP devices operable on DP master | 125 |
| Module format | Compact module S7-1500 single width |
Frequently Asked Questions
What is Siemens 6AG1542-5DX10-7XE0?
It is a SIPLUS S7-1500 CM 1542-5 communications module for connection of S7-1500 to PROFIBUS DP as DP master and DP Device.
Which interface and connection does this module provide?
It provides 1 electrical connection at the 1st interface according to PROFIBUS, using a 9-pin Sub-D socket (RS485).
What is the PROFIBUS transfer rate of CM 1542-5?
The transfer rate at the 1st interface according to PROFIBUS is 9.6 kbit/s … 12 Mbit/s.
What software is required for configuration?
STEP 7 Professional V18 (TIA Portal) or higher is required.
What selection details should be checked before ordering?
Check the PROFIBUS interface, DP master and DP Device function, the required STEP 7 Professional V18 (TIA Portal) or higher, and the module dimensions of width 35 mm, height 142 mm, and depth 129 mm.
