Key Features
- CPU 1510SP F-1 PN: Central processing unit for the ET 200SP system with product type designation CPU 1510SP F-1 PN.
- PROFINET IRT with 3-port switch: 1st interface with PROFINET IRT and an integrated 3-port switch.
- Work memory: 150 KB for program and 750 KB for data.
- Supply voltage: 24 V DC rated value, with permissible range 19.2 V to 28.8 V and reverse polarity protection.
- Diagnostics and control: RUN/STOP LED, ERROR LED, MAINT LED, PWR-LED monitoring, and LINK TX/RX connection display.
- Memory and configuration: SIMATIC Memory Card required, 1 slot for SIMATIC memory card, and BusAdapter required for port 1 and 2.
Applications
- PROFINET-based controller operation: Use the CPU as a PROFINET IO Controller for integrated network control.
- PROFINET IO device communication: Use the CPU as a PROFINET IO device for network-side data exchange.
- PROFIBUS communication via CM DP module: Use the unit for PROFIBUS DP master or PROFIBUS DP device communication via the CM DP module.
Technical Summary
| Product type designation | CPU 1510SP F-1 PN |
|---|---|
| Based on | 6ES7510-1SJ01-0AB0 |
| Work memory for program | 150 KB |
| Work memory for data | 750 KB |
| 1st interface | PROFINET IRT with 3-port switch |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Current consumption (rated value) | 0.6 A |
| Current consumption, max. | 0.9 A |
| Power loss, typ. | 5.6 W |
| Number of PROFINET interfaces | 1 |
Frequently Asked Questions
What is Siemens 6AG2510-1SJ01-1AB0 used for?
It is a SIPLUS ET 200SP CPU 1510SP F-1 PN central processing unit.
Which communication interfaces does this CPU provide?
It has 1 PROFINET interface, RJ 45 (Ethernet) support via X1 P3, and a 3-port switch; PROFINET-related BusAdapters are required for port 1 and 2.
What memory data are relevant for selection?
The CPU provides 150 KB work memory for program and 750 KB work memory for data.
What supply requirements should be checked before ordering?
The rated supply is 24 V DC, with a permissible range from 19.2 V to 28.8 V, and reverse polarity protection is included.
What must be used with the memory and port configuration?
A SIMATIC Memory Card is required, and a BusAdapter is required for port 1 and 2.
