Key Features
- Digital output module: DQ 4×24 … 230 V AC/2 A HF with 4 digital outputs and current-sourcing output behavior.
- Two operating modes: Supports DQ and DQ with energy-saving function, with phase control, half-wave, and full-wave operation.
- Diagnostics functions: Provides diagnostic function, diagnostic alarm, supply voltage monitoring, wire break detection channel by channel, and group error indication.
- BaseUnit and installation details: Suitable for BU type U0, with 1-wire, 2-wire, and 3-wire connection variants and mechanical coding element.
- Environmental and lifecycle details: Conformal coating, -40…+70 °C, OT4 with ST1/2 (+85 °C for 10 minutes), and Active Product lifecycle.
Applications
- Digital output switching: Switching 4 digital outputs for AC load control.
- BaseUnit-based wiring integration: Connection through BU type U0 in 1-wire, 2-wire, or 3-wire connection variants.
- Channel diagnostics and fault monitoring: Monitoring supply voltage, wire break, and group error conditions by channel.
Technical Summary
| Product type designation | DQ 4×24 … 230 V AC/2 A HF |
|---|---|
| Based on | 6ES7132-6FD00-0CU0 |
| Number of digital outputs | 4 |
| Type of digital output | Triac |
| Current-sourcing | Yes |
| Operating mode DQ | Yes |
| Operating mode DQ with energy-saving function | Yes |
| Operating mode Phase control | Yes; Control area: 8.5 … 100% of the phase angle |
| Supply voltage, rated value (AC) | 230 V; 47 … 63 Hz, max. rate of change of frequency 1 mHz/s |
| Output voltage, rated value (AC) | 230 V; 24V AC to 230V AC |
| Outputs | 8 byte |
| Power loss, typ. | 9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz |
| Usable BaseUnits | BU type U0 |
| Color code for module-specific color-coded label | CC20 |
| FW update possible | Yes |
| I&M data | Yes; I&M0 to I&M3 |
| Diagnostic alarm | Yes |
| Wire break | Yes; channel by channel |
| Isolation tested with | 2 545 V DC (type test) and according to EN 50155 (routine test) |
Frequently Asked Questions
What is Siemens 6AG2132-6FD00-4CU0?
It is a SIPLUS ET 200SP DQ 4×24..230VAC TX rail digital output module.
How many digital outputs does this module have?
It has 4 digital outputs.
What operating modes are supported?
It supports DQ, DQ with energy-saving function, phase control, half-wave, and full-wave operation.
What should I check before selection and wiring?
Check the required BaseUnit type, which is BU type U0, plus the supply voltage, output current limits, and the available connection variant.
