Key Features
- 2 transistor digital outputs: Provides 2 digital outputs with transistor output type.
- Diagnostics and status indication: Diagnostics function can be read out, with wire break and short-circuit diagnostics channel by channel, plus SF and output status LEDs.
- 24 V DC load voltage: Load voltage L+ rated value: 24 V; from power module.
- Conformal coating and extended temperature range: SIPLUS version with conformal coating and ambient temperature during operation from -25 °C to 70 °C.
- Short-circuit and reverse polarity protection: Short-circuit protection is Yes, and load voltage L+ reverse polarity protection is Yes.
Applications
- Digital output control: Controls 2 transistor digital outputs for switching digital loads.
- Diagnostic monitoring: Supports readout of diagnostics, wire break detection, and short-circuit detection on the output channels.
- Redundant load control: Allows parallel switching of two outputs for redundant control of a load.
Technical Summary
| Product function | Isochronous mode: Yes |
|---|---|
| Digital outputs | Number of digital outputs: 2 |
| Digital outputs type | Transistor |
| Load voltage L+ | Rated value (DC): 24 V; From power module |
| Output current for signal "1" | Rated value: 2 A |
| Output current for signal "0" | Residual current, max.: 0.5 mA |
| Short-circuit protection | Yes |
| Diagnostics function | Yes; Can be read out |
| Isolation tested with | 500 V DC |
| Ambient temperature during operation | -25 °C to 70 °C |
Frequently Asked Questions
What does Siemens 6AG1132-4BB31-7AB0 do?
It is a SIPLUS ET 200S EM 2DQ HF digital output module with 2 transistor outputs.
What load voltage does this module use?
Load voltage L+ rated value is 24 V DC, from the power module.
Which diagnostics are available on this output module?
It supports readout diagnostics, wire break diagnosis channel by channel, and short-circuit diagnosis channel by channel.
What installation and protection details matter for selection?
It has conformal coating, ambient operation from -25 °C to 70 °C, and isolation tested with 500 V DC.
