Key Features
- Chargecontroller for electric vehicle charging: SIMATIC ET 200SP TM ECC 2xPWM ST for conductive charging of electric vehicles according IEC61851 mode 3 for 2 charging points.
- 2 channels with charging-point signals: 2x Control Pilot, 2x Plug Present, 2x DQ switch contact for contactor, 2x DI read contact for contactor or connector locking, and 2x ACT for connector locking.
- 24 V DC supply and output power: Type of supply voltage: DC; rated value (DC): 24 V; output voltage: DC 24 V; switching capacity of the outputs with resistive load, max.: 1.3 A.
- Installation and BaseUnit fit: Mounting type: standard rail; mounting position: Horizontal; usable BaseUnits: BU type B0, B1; suitable for BU Typ BU20-P12+A0+4B and BU20-P12+A4+0B.
- Diagnostics and protection: Diagnostic alarm: Yes; ERROR LED: Yes; green PWR LED: Yes; channel status display: Yes; module diagnostics: Yes; IP degree of protection: IP20.
Applications
- Conductive AC charging control: Control of conductive AC charging of electric vehicles according to IEC 61851 mode 3.
- Two charging-point signal handling: Signal handling for 2 charging points with Control Pilot, Plug Present, contactor feedback, and connector-locking signals.
Technical Summary
| Product type designation | ECC 2x PWM ST |
|---|---|
| Firmware version | V1.04 |
| Engineering with | STEP 7 TIA Portal configurable/integrated from version V14 SP1 |
| Number of channels | 2; Acc. to IEC 61851-1 Mode 3 and/or SAE J1772 |
| Supply voltage | DC 24 V |
| Supply voltage, permissible range | 19.2 V … 28.8 V |
| Current consumption, typ. | 40 mA |
| Current consumption, max. | 90 mA |
| Digital inputs | 2; 1 per channel |
| Digital inputs, parameterizable | Yes; 12 V / 24 V |
| Digital outputs | 2; 1 per channel |
| PWM output | Yes; According to IEC 61851 |
| Analog outputs | 2; Control pilot acc. to IEC 61851-1 and/or SAE J1772 |
| Mounting type | standard rail |
| Mounting position | Horizontal |
| IP degree of protection | IP20 |
Frequently Asked Questions
What is Siemens 6FE1242-6TM10-0BB1 used for?
It is an SIMATIC ET 200SP TM ECC 2xPWM ST chargecontroller for conductive charging of electric vehicles according IEC61851 mode 3.
How many channels does 6FE1242-6TM10-0BB1 provide?
It provides 2 channels; the module is specified for 2 charging points.
Which supply voltage does the module require?
Type of supply voltage: DC. Rated value (DC): 24 V; permissible range: 19.2 V to 28.8 V.
What signals and outputs are included on this module?
It includes 2x Control Pilot, 2x Plug Present, 2x DQ switch contact for contactor, 2x DI read contact for contactor or connector locking, and 2x ACT for connector locking.
What installation and protection details should be checked before selection?
Mounting type: standard rail; mounting position: Horizontal; IP degree of protection: IP20; suitable BaseUnits: BU type B0, B1.