Key Features
- CPU 1510SP F-1 PN: SIMATIC DP central processing unit for ET 200SP.
- PROFINET IRT interface: 1st interface: PROFINET IRT with 3-port switch.
- Memory configuration: 150 KB work memory for program and 750 KB for data.
- Selection requirements: SIMATIC Memory Card required and BusAdapter required for port 1 and 2.
- Safety and diagnostics: Highest safety class achievable in safety mode: PLe and SIL 3, with RUN/STOP LED, ERROR LED, MAINT LED, and PWR-LED monitoring.
Applications
- ET 200SP central control: Central processing for an ET 200SP station.
- PROFINET IRT network integration: Communication over a PROFINET IRT interface with a 3-port switch.
- Failsafe control and safety-oriented operation: Use in safety mode with PLe and SIL 3.
Technical Summary
| Product type designation | CPU 1510SP F-1 PN |
|---|---|
| Firmware version | V2.9 |
| HW functional status | FS05 |
| Work memory for program | 150 KB |
| Work memory for data | 750 KB |
| 1st interface | PROFINET IRT with 3-port switch |
| Bit performance | 72 ns |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Infeed power to the backplane bus | 8.75 W |
| Power loss, typ. | 5.6 W |
Frequently Asked Questions
What is Siemens 6ES7510-1SJ01-0AB0 used for?
It is a SIMATIC DP CPU 1510SP F-1 PN for ET 200SP.
What memory does CPU 1510SP F-1 PN provide?
It has 150 KB work memory for program and 750 KB for data.
Which interface is supplied on 6ES7510-1SJ01-0AB0?
The 1st interface is PROFINET IRT with a 3-port switch.
What must be checked before selecting this CPU?
A SIMATIC Memory Card is required, and a BusAdapter is required for port 1 and 2.
What safety class does this CPU support in safety mode?
The highest safety class achievable in safety mode is PLe and SIL 3.
