Key Features
- 2 analog outputs: Provides 2 analog outputs for voltage output tasks.
- Voltage output ranges: Supports 1 V to 5 V and -10 V to +10 V.
- Diagnostics and protection: Short-circuit diagnosis is available, and the voltage output is short-circuit protected.
- Terminal and wiring options: For voltage output, two-wire connection is possible without compensation of the line resistances, and four-wire connection is also supported.
- Environmental design: Conformal coating is included, with an operating temperature range of -25…+60 °C.
Applications
- Analog voltage output control: Converts controller output into 2 voltage outputs for connected loads.
- Wired actuator connection: Supports two-wire or four-wire connection for voltage output wiring.
Technical Summary
| Product type | SIPLUS ET 200S EM 2AQ U |
|---|---|
| Basis | 6ES7135-4FB01-0AB0 |
| Outputs | 2 analog outputs |
| Output ranges | 1 V to 5 V; -10 V to +10 V |
| Load voltage L+ | 24 V; From power module |
| Reverse polarity protection | Yes |
| Cycle time (all channels) | 1.5 ms |
| Resolution with overrange | 14 bit; 1 to 5 V: 12 bit, ±10 V: 13 bit + sign |
| Short-circuit protection | Yes |
| Potential separation between channels and backplane bus | Yes |
| Potential separation between channels and load voltage L+ | Yes |
| Ambient temperature during operation | -25 °C; = Tmin / 60 °C; = Tmax |
Frequently Asked Questions
What is Siemens 6AG1135-4FB01-2AB0 used for?
It is a SIPLUS ET 200S EM 2AQ U analog output module with 2 analog outputs for voltage output tasks.
Which output voltage ranges does this module support?
It supports 1 V to 5 V and -10 V to +10 V.
What wiring options are available for the voltage outputs?
For voltage output, two-wire connection is possible without compensation of the line resistances, and four-wire connection is also supported.
What electrical and diagnostic details should be checked before selection?
Check the 24 V load voltage L+, reverse polarity protection, short-circuit protection, short-circuit diagnosis, and the 1.5 ms cycle time for all channels.
