Key Features
- PN/PN coupler: Deterministic data exchange between max. 4 PN-Controller per subnet and also from subnet to subnet.
- Communication functions: Supports PROFIsafe data exchange, I/O-, MSI-, MSO- and data record communication.
- PROFINET interface concept: 2 PROFINET interfaces via BusAdapter with integrated switch and up to 100 Mbit/s.
- Power and installation: 24 V DC rated value, reverse polarity protection, redundant power supply, and mounting rail 7.5 mm and 15 mm.
- Diagnostics and engineering: Status indicator, alarms, parameterizable diagnostics function, and engineering with STEP 7 TIA Portal from V20 or higher.
Applications
- PN-Controller-to-PN-Controller data exchange: Deterministic data exchange between PN-Controllers within a subnet and between subnets.
- PROFIsafe communication: PROFIsafe data exchange in a PROFINET-based system.
- I/O and data record communication: I/O-, MSI-, MSO- and data record communication over the PN/PN coupler.
Technical Summary
| Product type designation | PN/PN coupler |
|---|---|
| Firmware version | V6.0 |
| Vendor identification (VendorID) | 002AH |
| Device identifier (DeviceID) | 0604H |
| Isochronous mode | Yes; 500 μs |
| Mounting | Mounting rail 7.5 mm and 15 mm |
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Number of PROFINET interfaces | 2; via BusAdapter |
| Transmission rate, max. | 100 Mbit/s |
| Protocol | PROFINET IO Device |
Frequently Asked Questions
What is Siemens 6ES7158-3AD10-0XA0?
It is a SIMATIC PN/PN coupler.
How many PN-Controller can it exchange data between per subnet?
It supports deterministic data exchange between max. 4 PN-Controller per subnet.
What power supply does 6ES7158-3AD10-0XA0 require?
The rated supply is 24 V DC, with a permissible range of 19.2 V to 28.8 V.
How many PROFINET interfaces does this PN/PN coupler have?
It has 2 PROFINET interfaces via BusAdapter.
Which engineering software versions are supported for this coupler?
STEP 7 TIA Portal from V20 or higher and STEP 7 from V5.7 SP3 are supported.
