Key Features
- Digital output module: DQ 4×24 V DC/2 A HF with 4 digital outputs and transistor output type.
- Selection and installation details: Suitable for BU type A0 and color code CC02.
- Environmental protection: Conformal coating and -40…+70 °C.
- Diagnostics: Channel diagnostics, diagnostic alarm, monitoring the supply voltage, wire break, short-circuit, and group error.
- Engineering and maintenance data: STEP 7 TIA Portal configurable/integrated from version see entry ID: 109746275, with I&M data Yes; I&M0 to I&M3 and FW update possible Yes.
Applications
- 24 V DC output switching: Switching 24 V DC loads through 4 digital outputs.
- Channel-level diagnostics for output circuits: Monitoring output channels for wire break, short-circuit, and group error conditions.
Technical Summary
| Product type designation | DQ 4×24 V DC/2 A HF |
|---|---|
| based on | 6ES7132-6BD20-0CA0 |
| Firmware version | V1.0 |
| FW update possible | Yes |
| Usable BaseUnits | BU type A0 |
| Color code for module-specific color-coded label | CC02 |
| I&M data | Yes; I&M0 to I&M3 |
| Isochronous mode | Yes |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Current consumption, max. | 60 mA; without load |
Frequently Asked Questions
What is Siemens 6AG1132-6BD20-7CA0?
It is a SIPLUS ET 200SP DQ 4×24 V DC/2 A HF digital output module.
How many digital outputs does this module provide?
It provides 4 digital outputs.
What supply voltage does the module use?
The rated value is 24 V DC, with a permissible range of 19.2 V to 28.8 V.
Which installation base unit is suitable for this module?
It is suitable for BU type A0.
What diagnostics are supported by this output module?
It supports diagnostics function, diagnostic alarm, monitoring the supply voltage, wire break, short-circuit, and group error.
