Key Features
- 16 digital outputs: Number of digital outputs: 16.
- Source output design: Type of digital output: Source output (PNP, current-sourcing).
- Diagnostics and substitute values: Module diagnostics for short-circuit to L+ and ground, wire break, and supply voltage, with substitute value output.
- BU type A0 installation: Fits BU type A0 and supports 1-wire connection, 2-wire connection, and 3-wire connection variants.
Applications
- Digital output signaling: Source output (PNP, current-sourcing) for switching 16 digital outputs.
- Digital input control: Controlling a digital input.
- Output fault monitoring: Monitoring supply voltage, wire break, short-circuit to L+, and short-circuit to ground through module diagnostics.
Technical Summary
| Product type designation | DQ 16x24VDC/0.5 ST |
|---|---|
| Number of digital outputs | 16 |
| Type of digital output | Source output (PNP, current-sourcing) |
| Rated value (DC) | 24 V |
| Output current for signal "1" rated value | 0.5 A |
| Current per module, max. | 8 A; see Equipment Manual "Derating curve" |
| Current per channel, max. | 0.5 A |
| Power loss, typ. | 1 W |
| Supply voltage permissible range, lower limit (DC) | 19.2 V |
| Supply voltage permissible range, upper limit (DC) | 28.8 V |
| Usable BaseUnits | BU type A0 |
| Isolation tested with | 707 V DC (type test) |
Frequently Asked Questions
What is the Siemens 6ES7132-6BH01-0BA0?
It is a SIMATIC ET 200SP digital output module, DQ 16x24VDC/0.5 ST.
How many outputs does 6ES7132-6BH01-0BA0 provide?
It provides 16 digital outputs.
What output type and load rating does this module use?
It is a source output (PNP, current-sourcing) module with 0.5 A per channel.
What should be checked for installation of this ET 200SP output module?
Check the BU type A0 base unit and the available 1-wire, 2-wire, or 3-wire connection variant.
