Key Features
- 2-port PROFINET interface module: IM 155-6 PN/2 HF with 1 PROFINET interface and 2 ports via BusAdapter.
- Station capacity: Max. 64 I/O modules and 16 ET 200AL modules.
- Redundancy and swapping: S2 redundancy and Multi-hot-swapping.
- Isynchronous operation: Isochronous mode with 250 μs shortest clock pulse and max. cycle 4 ms.
- Supply and protection: Rated value (DC) 24 V, permissible range 19.2 V to 28.8 V, and reverse polarity protection.
- Diagnostics and interface services: PROFINET IO Device, Open IE communication, PROFINET MRP, PROFIsafe, and diagnostic LEDs for RUN, ERROR, MAINT, PWR, and LINK TX/RX.
Applications
- PROFINET station integration: Connects an ET 200SP station to a PROFINET network as a PROFINET IO Device.
- Open IE communication: Supports TCP/IP, SNMP, and LLDP communication over Open IE.
- Shared-device operation: Supports shared device use with up to 4 IO Controllers.
Technical Summary
| Product type designation | IM 155-6 PN/2 HF |
|---|---|
| based on | 6ES7155-6AU01-0CN0 |
| Supply voltage, rated value (DC) | 24 V |
| Supply voltage, permissible range, lower limit (DC) | 19.2 V |
| Supply voltage, permissible range, upper limit (DC) | 28.8 V |
| Current consumption, max. | 700 mA |
| Power loss, typ. | 2.4 W |
| Number of PROFINET interfaces | 1; 2 ports (switch) |
| Compatible BusAdapter | BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ / RJ45, BA SCRJ / FC, BA 2x LC, BA LC / RJ45, BA LC / FC |
| PROFINET IO Device | Yes |
| Open IE communication | Yes |
| PROFIsafe | Yes |
Frequently Asked Questions
What is Siemens 6AG1155-6AU01-2CN0?
It is a SIPLUS ET 200SP IM155-6PN HF interface module, based on 6ES7155-6AU01-0CN0.
How many PROFINET ports does this module have?
It has 1 PROFINET interface with 2 ports via BusAdapter.
What power supply does the module require?
Rated value: 24 V DC, with a permissible range of 19.2 V to 28.8 V.
Which communication functions are supported?
It supports PROFINET IO Device, Open IE communication, PROFINET MRP, PROFIsafe, TCP/IP, SNMP, and LLDP.
What should be checked before selection?
Check the required BusAdapter type, the station capacity needed, and whether S2 redundancy, multi hot swap, or isochronous mode are required.
