Key Features
- Analog output module: AQ 4xU/I with 4 analog outputs.
- Voltage and current output ranges: Supports 0 to 10 V, 1 V to 5 V, -10 V to +10 V, 0 to 20 mA, -20 mA to +20 mA, and 4 mA to 20 mA.
- M12 connection: 4xM12 connection format.
- Protection rating: Degree of protection IP65/67.
- Engineering support: Configurable in STEP 7 V5.5 SP4 Hotfix 7 or higher and STEP 7 TIA Portal V14 or higher.
Applications
- Analog signal output for four channels: Used to output four analog signals from the module.
- Voltage or current output for connected loads: Used for voltage and current signal output to connected loads through the module's output ranges.
Technical Summary
| Product type designation | AQ 4xU/I |
|---|---|
| Number of analog outputs | 4 |
| Degree of protection | IP65/67 |
| Load voltage 1L+ rated value (DC) | 24 V |
| Load voltage 1L+ permissible range, lower limit (DC) | 20.4 V |
| Load voltage 1L+ permissible range, upper limit (DC) | 28.8 V |
| Number of outputs | 4 |
| Output current nominal | Total current 1 A up to 45 °C; 0.5 A up to 55 °C |
| Analog outputs cycle time (all channels) max. | 1 ms |
| Voltage output, short-circuit current, max. | 24 mA |
| Current output, no-load voltage, max. | 15 V |
Frequently Asked Questions
What is Siemens 6ES7145-5ND00-0BA0 used for?
It is a SIMATIC ET 200AL AQ 4xU/I analog output module with 4 analog outputs.
What output ranges does the AQ 4xU/I support?
It supports 0 to 10 V, 1 V to 5 V, -10 V to +10 V, 0 to 20 mA, -20 mA to +20 mA, and 4 mA to 20 mA.
What is the load voltage for 6ES7145-5ND00-0BA0?
The load voltage 1L+ is 24 V DC, with a permissible range from 20.4 V to 28.8 V DC.
Which engineering software versions support this module?
It is configurable in STEP 7 V5.5 SP4 Hotfix 7 or higher and STEP 7 TIA Portal V14 or higher.
