Key Features
- 4 digital outputs: Digital output module with 4 outputs.
- High-speed output type: Type of digital output: Source output (PNP, current-sourcing).
- 3 alternative operating modes: DQ, Oversampling, PWM.
- Module diagnostics: Module diagnostics available.
- BaseUnit selection: Suitable for BU type A0.
- Engineering support: STEP 7 TIA Portal configurable/integrated from version STEP 7 V15.1 or higher.
Applications
- Digital output switching: Switching 4 digital outputs in a SIMATIC ET 200SP I/O system.
- PWM output control: Generating PWM output.
- Comparison-value switching: Switching outputs by comparison values via MtM (module-to-module communication).
- Oversampling output handling: Using oversampling operating mode for output handling.
Technical Summary
| Product type designation | DQ 4×24 V DC/2 A HS |
|---|---|
| Number of digital outputs | 4 |
| Type of digital output | Source output (PNP, current-sourcing) |
| Supply voltage, rated value (DC) | 24 V |
| Supply voltage, permissible range | 19.2 V to 28.8 V |
| Power loss, typ. | 2.5 W; at 24 V, 25 °C, DQ mode, 2 A per channel |
| Operating modes | DQ; Oversampling; PWM |
| Isochronous mode | Yes; Operating modes DQ and OVS only |
| Suitable BaseUnit | BU type A0 |
| STEP 7 TIA Portal version | STEP 7 V15.1 or higher |
| PROFINET GSD version | GSDML V2.33 |
| Isolation tested with | 707 V DC (type test) |
Frequently Asked Questions
What is Siemens 6ES7132-6BD20-0DA0 used for?
It is a SIMATIC ET 200SP digital output module with 4 outputs and DQ 4x 24 V DC/2A High Speed.
Which operating modes does this module support?
It supports DQ, Oversampling, and PWM.
What supply voltage does 6ES7132-6BD20-0DA0 require?
The rated supply voltage is 24 V DC, with a permissible range of 19.2 V to 28.8 V.
What engineering version is needed for STEP 7 TIA Portal configuration?
STEP 7 TIA Portal configurable/integrated from version STEP 7 V15.1 or higher.
Which BaseUnit is suitable for this ET 200SP module?
It is suitable for BU type A0.
