Key Features
- 16 transistor digital outputs: Type of digital output: Transistor; number of digital outputs: 16.
- 0.5 A switching capacity: Output current for signal "1" rated value: 0.5 A; current per channel, max.: 0.5 A; current per group, max.: 0.5 A.
- Diagnostics and status indication: RUN LED, ERROR LED, MAINT LED, channel status display, and module diagnostics LED are supported.
- Selection and engineering support: STEP 7 TIA Portal configurable/integrated from version V13 SP1 / -; STEP 7 configurable/integrated from version V5.5 SP3 / -.
- Front connector ordered separately: Front connector: screw terminals or push-in.
Applications
- 16-channel digital output switching: Switching digital loads through 16 transistor outputs in groups of 1.
- Safety-oriented shutdown of load groups: Safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015.
Technical Summary
| Product type designation | DQ 16×24 … 48 V UC/125 V DC/0.5 A ST |
|---|---|
| Number of digital outputs | 16 |
| Type of digital output | Transistor |
| Output voltage, rated value (DC) | 24 V; 48 V, 125 V |
| Output current for signal "1" rated value | 0.5 A |
| Total current of the outputs, Current per module, max. | 8 A |
| Total current of the outputs, Current per group, max. | 0.5 A |
| Power consumption from the backplane bus | 2 W |
| Power loss, typ. | 3.8 W |
| Potential difference between different circuits | 125 V DC/48 V AC |
| Isolation tested with | 2 000 V DC |
| Engineering with STEP 7 TIA Portal from version | V13 SP1 / – |
Frequently Asked Questions
What is Siemens 6ES7522-5EH00-0AB0?
It is a SIMATIC S7-1500 digital output module, DQ16x24..48VUC/125V DC/0.5A ST.
How many outputs does 6ES7522-5EH00-0AB0 have?
It has 16 digital outputs.
What is the output type and current rating of this module?
The output type is Transistor, and the rated output current for signal "1" is 0.5 A.
Which engineering software versions support 6ES7522-5EH00-0AB0?
STEP 7 TIA Portal is configurable/integrated from version V13 SP1 / -, and STEP 7 from version V5.5 SP3 / -.
What connector is needed for this digital output module?
The front connector is ordered separately, with screw terminals or push-in.
